Plasma CNC Pipe Cutting Machine With Auto Ignition Device Air Cutting Gas
Description:
1. With the connection of figure and data, The machine’s control interface’s operation is very simple as workers just need to input the semidiameter of main pipe and branch pipe, intersect angle and cutting speed, then enter ‘start’ button and it will be auto ignition, preheat and cutting process.
2. Since there is the reasonable cutting introduce and outlet line in the software, it can promise the good quality.
3. After cutting, the parameters can be saved as document for the following similar process.
Cutting Pipe Shape:
1. End cut
2. End Slotting
3. Opening
4. Cut - flower(can cut all kinds of graphics)
5. The main pipe generates the branch pipe and opens the intersecting line hole
6. The main pipe generates the taper pipe opens the intersecting line hole
7. Intersecting line end cut for connection of the main pipe and branch pipe
8. Three pipes joint
9. One branch pipe and the main pipe and another branch pipe combination for intersection
10. Pipe welding elbow, " Small Shrimp Festival " oblique section cutting.
Technical Parameters for Pipe and Plate CNC Cutting Machine
| 1 | Cutting shape | plate and pipe |
| 2 | LCD Display Dimension | 7.Inches |
| 3 | Effective Cutting Size | 1500*3000mm |
| 4 | Railway Size | 2000*3500mm |
| 5 | Cutting pipe diameter | 50-150mm |
| 6 | Cutting pipe wallthickness | 1-10mm |
| 7 | Cutting pipe length | 3000mm |
| 8 | Installation Mode | With combined installation and random movement, without occupying fixed site and directly cutting on steel plates |
| 9 | Plasma Cutting Thickness | 0.5--20mm ( Depends on plasma power source capacity) |
| 10 | Flame Cutting Thickness | 5--200mm |
| 11 | Cutting Speed | 0-4000mm per minute |
| 12 | Height Control | Electric Height Control+Arc Voltage Height Control(THC) |
| 13 | Drive Mode | Single drive |
| 14 | Cutting Mode | flame and plasma |
| 15 | Ignition device | Auto ignition device |
| 16 | File transmission | USB transmission |
| 17 | Gas Pressure | Max. 0.1Mpa |
| 18 | Oxygen Pressure | Max.0.7Mpa |
| 19 | Cutting Gas | Flame: Oxygen+ Acetylene / Propane/ Coal gas Plasma :air |
| 20 | Software | FastCAM Standard (support Auto CAD/ Solidworks/ CAXA/ Types etc.) |
| 21 | Cutting accuracy | ±0.5mm |
| 22 | Power Supply Voltage/Frequency | 220V 50HZ / 60HZ |
| 23 | Rated Power Supply | 1500W |
| 24 | Working Temperature | -10℃-60℃, Relative Humidity, 0-95%. |
Applications:
CNC plasma cutting machine is now widely used in industries such as machine tool manufacturing, Petro-chemical equipment, light-industrial machinery, shipbuilding, pressure vessel, mining machinery, electric power, bridge construction, aerospace, steel structure etc.
